Skip to product information
1 of 1

C-Dub Tech

VR Tuned ECU Flash Tune Ford Focus ST 2.0L EcoBoost

VR Tuned ECU Flash Tune Ford Focus ST 2.0L EcoBoost

Regular price $500.00 USD
Regular price Sale price $500.00 USD
Sale Sold out
Shipping calculated at checkout.

The Ford Focus ST ECU Tune is done by VR Tuned is one of the best upgrades you can do. The cars 2.0L turbo is already a load of fun to drive. With our new ECU calibration, you are able to gain improved performance with increases in horsepower and torque. The biggest difference when you flash your car is the overall driveability improvement. Your car will have much better throttle response throughout the gears. Where your car is sluggish off the line, huge gains of torque come in giving you a vast improvement of your 0-60mph time. Depending on mods, the midrange can increase through the curve and the top end pulls harder to redline.

Crank Horsepower Ratings:

  • Stock Power: 250HP | 266ft/lbs
  • Stage 1 Power: 270HP | 313ft/lbs
  • Stage 2 Power: 285HP | 332ft/lbs

What are the benefits of VR Tuned?

  • #1 priority is our customer service to you!
  • Our tuning is used worldwide. We have powered vehicles of all types.
  • All ECU tunes can be reverted back to stock if necessary.
  • With the VR Tuned ECU Flash, basic bolt-on performance parts will not require a retune of your ECU.
  • Adding parts such as an exhaust, intake, plenum, pulley, will all adjust with the tune.
  • If you add higher octane fuel, the ECU will adjust accordingly.
  • We can tune cars worldwide including JDM, EU, Australian, and USA cars for different types of octane or environments.
  • Other custom enhancements are available if requested and applicable.
  • We test and dyno tune on our own cars to make sure what you get is safe, reliable, and gives you the results you want!

How to Flash Your ECU?

  • Use the Alientech Powergate 3+ handheld device. This device is a touchscreen module that lets you store your original and tuned files to easily flash between them. See Instructions Here.
  • We can bench flash the ECU. To bench flash the ECU, you must remove it from your vehicle and send it to us. Once we receive the ECU, we will prepare the tune file and then send it back to you for reinstallation.
  • Bring your vehicle to our facility where we can use our Master Cable to flash your vehicle.


  • You can select to get both Stages of our Tune.  The Stage 2 is usually for those looking to maximize the performance of their vehicle.  Though not required unless stated, this is usually for those running a full performance exhaust system and other bolt-on parts. Can only be done if OBDII flashing hardware is purchased.
View full details

Collapsible content